Shift lever override – Jeep 2013 Wrangler - Owner Manual User Manual

Page 564

Text mode
Original mode

SHIFT LEVER OVERRIDE

If a malfunction occurs and the shift lever cannot be
moved out of the PARK position, you can use the
following procedure to temporarily move the shift lever:

1. Turn the engine OFF.

2. Firmly apply the parking brake.

3. Using a small screwdriver or similar tool, remove the

shift lever override access cover (located to the right of
the shift lever).

4. Turn the ignition to the ACC or ON/RUN position,

but do not start the engine.

5. Press and maintain firm pressure on the brake pedal.

6. Insert the screwdriver or similar tool into the access port,

and push and hold the override release lever down.

Shift Lever Override Access Cover

562

WHAT TO DO IN EMERGENCIES