Operating instructions/precautions, Four–wheel drive operation, Command-trac i – Jeep 2012 Wrangler Unlimited - Owner Manual User Manual
Page 392: Or rock-trac)
Screen Display
1
2
3
4
D
Actual Gear(s) Allowed
1
1-2
1-3
1-4
1-5
NOTE:
To select the proper gear position for maximum
deceleration (engine braking), tap the shift lever to the
left (-) repeatedly as the vehicle slows. The transmission
will shift to the range from which the vehicle can best be
slowed down.
Overdrive Operation
The automatic transmission includes an electronically
controlled Overdrive (fifth gear). The transmission will
automatically shift into the Overdrive gear if the follow-
ing conditions are present:
• the shift lever is in the DRIVE position,
• vehicle speed is sufficiently high, and
• the driver is not heavily pressing the accelerator.
FOUR–WHEEL DRIVE OPERATION
(COMMAND-TRAC I
ா OR ROCK-TRACா)
Operating Instructions/Precautions
The transfer case provides four mode positions:
• 2H (Two-wheel drive high range)
• 4H (Four-wheel drive high range)
• N (Neutral)
• 4L (Four-wheel drive low range)
390
STARTING AND OPERATING