Jeep 2011 Wrangler - User Guide - Manual (Page 71)

FLUIDS AND CAPACITIES
Component Fluid, Lubricant, or Genuine Part Capacities
Engine Coolant 3.8L MOPAR ® Antifreeze/Coolant Five
Year/100,000 Mile Formula HOAT
(Hybrid Organic Additive Technology)
or equivalent.
13 Quarts (12 Liters)
Includes heater and
coolant recovery bottle
filled to MAX level.
Engine Oil with filter
3.8L API certified 5W-20 engine oil,
meeting the requirements of Chrysler
material standard MS-6395. Refer to
your oil filler cap for correct SAE
Grade. 6 quarts (5.7 Liters)
Fuel Selection 2 Door 87 Octane 18.6 Gallons (70 Liters)
Fuel Selection 4 Door 87 Octane 22.5 Gallons (85 Liters)
Engine Oil Filter 3.8L MOPAR ® Engine Oil Filter or
equivalent.
—
Spark Plug 3.8L RE14PLP5 (Gap 0.050 in [1.27 mm]) —
Automatic
Transmission MOPAR ® ATF+4 ® Automatic
Transmission Fluid or equivalent
licensed ATF+4
® product.
—
Manual Transmission MOPAR ® Manual Transmission
Lubricant or equivalent meeting the
requirements or Chrysler material
standard MS–9224.
—
Transfer Case MOPAR ® ATF+4 ® Automatic
Transmission Fluid or equivalent
licensed ATF+4
® product.
—
Axle differential (front) MOPAR ® Gear & Axle Lubricant SAE
80W–90 API GL–5 or equivalent.
—
Axle differential (rear) 226 RBI (Model 44) - MOPAR ® Gear
& Axle Lubricant SAE 80W-90 API
GL-5 or equivalent. For trailer towing,
use MOPAR
® Synthetic Gear & Axle
Lubricant SAE 75W-140 or
equivalent. Models equipped with
Trac-Lok™ require an additive.
—
Brake Master Cylinder MOPAR ® DOT 3 and SAE J1703
should be used or equivalent. If DOT
3 is not available, then DOT 4 is
acceptable. Use only recommended
brake fluids.
—
Power Steering
Reservoir MOPAR ® Power Steering Fluid +4 or
MOPAR ® ATF+4 ® Automatic
Transmission Fluid or equivalent
licensed ATF+4
® product.
—
MAINTAINING YOUR VEHICLE
69