Jeep 2011 Patriot - User Guide - Manual (Page 65)

FLUIDS AND CAPACITIES
Component Fluid, Lubricant, or
Genuine Part Capacities
Engine Coolant 2.0L, 2.4L MOPAR ® Antifreeze/Coolant
Five Year/100,000 Mile
Formula HOAT (Hybrid
Organic Additive Technology)
or equivalent.
7.2 Quarts (6.8 Liters)
Includes heater and
coolant recovery bottle
filled to MAX level.
Engine Oil with Filter 2.0L,
2.4L API Certified SAE 5W-20
engine oil, meeting the
requirements of Chrysler
Material Standard MS-6395.
Refer to the engine oil filler
cap for correct SAE grade. 4.5 Quarts (4.26 Liters)
Fuel Selection 2.0L, 2.4L 87 Octane 13.6 Gallons (51.5 Liters)
Engine Oil Filter 2.0L, 2.4L MOPAR ® Engine Oil Filter or
equivalent.
—
Spark Plugs 2.0L, 2.4L ZFR5F-11 (Gap 0.043 in
[1.11 mm])
—
Automatic Transmission
(CVT) MOPAR ® CVTF + 4 ®
Automatic Transmission Fluid.
—
Manual Transmission MOPAR ® ATF+4 ® Automatic
Transmission Fluid or
equivalent licensed ATF+4
®
product.
—
Rear Drive Assembly
(RDA) MOPAR ® Gear & Axle
Lubricant SAE 80W-90 API
GL 5 or equivalent
non-synthetic product.
—
Power Transfer Unit (PTU) MOPAR ® Gear & Axle
Lubricant SAE 80W-90 API
GL 5 or equivalent
non-synthetic product.
—
Brake Master Cylinder MOPAR ® DOT 3 and SAE
J1703 should be used or
equivalent. If DOT 3 is not
available, then DOT 4 is
acceptable. Use only
recommended brake fluids or
equivalent.
—
Power Steering Reservoir MOPAR ® Power Steering
Fluid +4 or MOPAR ® ATF+4 ®
Automatic Transmission Fluid
or equivalent licensed ATF+4
®
product.
—
MAINTAINING YOUR VEHICLE
63