Programmable features, Key fob programmable features, Electronics – Jeep 2011 Liberty - User Guide User Manual
Page 44
ECO
• The ECO message will appear in your odometer whenever you are driving in a fuel
efficient manner.
• This feature allows you to monitor when you are driving in a fuel efficient manner, and
it can be used to modify driving habits in order to increase fuel economy.
PROGRAMMABLE FEATURES
Electronic Vehicle Information Center (EVIC) – If Equipped
• The EVIC can be used to program the following Personal Settings. Press and release
the MENU button until Personal Settings displays, then press the DOWN
button
to scroll through the settings. Press the SELECT button
to change the
setting.
• Language
• Headlamp Off Delay
• Auto Door Locks
• Easy Exit Seat
• Auto UNLK On Exit
• Key-Off Power Delay
• RKE Unlock
• ILLUMIN. Approach
• RKE Linked To Memory
• Park ASST. System
• Sound Horn With Key Fob Lock
• Hill Start Assist
• Flash Lamp Lock
• Rain Sensing Intermittent Wipers
• Display ECO
• Turn Headlamps On With Wipers
• Turn Headlamps On With Remote Key
Unlock
Key Fob Programmable Features
• The following features may also be programmed by using the Key Fob transmitter or
the ignition switch and driver's door lock switch.
NOTE: Pressing the LOCK button while you are inside the vehicle will activate the
Vehicle Security Alarm. Opening a door with the Vehicle Security Alarm activated will
cause the alarm to sound. Press the UNLOCK button to deactivate the Vehicle Security
Alarm.
Unlock On First Press
• To unlock either the driver's side, or all doors, on the first press of the UNLOCK
button:
• Press and hold the LOCK button for at least 4 seconds, but no longer than
10 seconds. Then, press and hold the UNLOCK button while still holding the
LOCK button.
• Release both buttons at the same time.
ELECTRONICS
42