beautypg.com

Operating your vehicle, Turn signal/lights lever, Headlights/parking lights – Jeep 2011 Liberty - User Guide User Manual

Page 20: Instrument panel dimmer, Flash to pass, High beam operation, Fog lights

background image

TURN SIGNAL/LIGHTS LEVER

Headlights/Parking Lights

• Rotate the end of the lever to the first detent for parking lights

, the second

detent for headlights

and the third detent for AUTO.

• When set to AUTO, the system automatically turns the headlights on or off based on

ambient light levels.

Instrument Panel Dimmer

• Rotate the center portion of the lever to the extreme bottom position to fully dim the

instrument panel lights and prevent the interior lights from illuminating when a door is
opened.

• Rotate the center portion of the lever up to increase the brightness of the instrument

panel lights when the parking lights or headlights are on.

• Rotate the center portion of the lever upward to the next detent position to brighten

the odometer and radio controls when the parking lights or headlights are on.

• Rotate the center portion of the lever upward to the last detent to turn on the interior

lighting.

Flash To Pass

• Pull the lever toward you to activate the high beams. The high beams will remain on

until the lever is released.

High Beam Operation

• Push the lever forward to activate the high beams.

NOTE: For safe driving, turn off the high beams when oncoming traffic is present to
prevent headlight glare and as a courtesy to other motorists.

Fog Lights

• Turn on the parking lights or low beam headlights and pull out the end of the lever.

OPERATING YOUR VEHICLE

18