beautypg.com

Shift positions – Jeep 2011 Grand Cherokee - Owner Manual User Manual

Page 361

background image

Proper operation of four-wheel drive vehicles depends
on tires of equal size, type, and circumference on each
wheel. Any difference will adversely affect shifting and
cause damage to the transfer case.

Because four-wheel drive provides improved traction,
there is a tendency to exceed safe turning and stopping
speeds. Do not go faster than road conditions permit.

WARNING!

You or others could be injured if you leave the
vehicle unattended with the transfer case in the N
(Neutral) position without first fully engaging the
parking brake. The transfer case N (Neutral) position
disengages both the front and rear driveshafts from
the powertrain and will allow the vehicle to move
regardless of the transmission position. The parking
brake should always be applied when the driver is
not in the vehicle.

Shift Positions

For additional information on the appropriate use of each
transfer case mode position, see the information below:

4WD AUTO
This range is used on surfaces such as ice, snow, gravel,
sand, and dry hard pavement.

NOTE:

Refer to “Selec-Terrain

௡ – If Equipped” in “Start-

ing and Operating” for further information on the vari-
ous positions and their intended usages.

NEUTRAL
This range disengages both the front and rear driveshafts
from the powertrain. It is to be used for flat towing
behind another vehicle. Refer to “Recreational Towing”
in “Starting and Operating” for further information.

5

STARTING AND OPERATING

359

This manual is related to the following products: