Jeep 2009 Grand Cherokee - Owner Manual - Manual (Page 456)

Rear Tail, Stop, Turn Signal, And Backup Lights
1. Raise the liftgate.
2. Remove the two Torx fasteners.
3. Squeeze the socket assembly tabs to remove it from the
housing.
4. Pull the bulb to remove it from the socket.
5. Replace the bulb, reinstall the socket, and reattach the
light assembly.
1 — Tail/Stop Light Bulb 3 — Back-Up Light Bulb
2 — Tail/Turn Signal Bulb
454 MAINTAINING YOUR VEHICLE