beautypg.com

Using the panic alarm, Programming additional transmitters, Transmitter battery service – Jeep 2009 Grand Cherokee - Owner Manual User Manual

Page 27

background image

Using the Panic Alarm

To turn the Panic Alarm feature on or off, press and hold
the PANIC button on the RKE transmitter for at least one
second and release. When the Panic Alarm is on, the
headlights and park lights will flash, the horn will pulse
on and off, and the interior lights will turn on.

The Panic Alarm will stay on for three minutes unless
you turn it off by either pressing the PANIC button a
second time, or drive the vehicle at a speed of 15 mph
(24 km/h) or greater.

NOTE:

• The interior lights will turn off if you turn the ignition

switch to the ACC or ON position while the Panic
Alarm is activated. However, the exterior lights and
horn will remain on.

Programming Additional Transmitters

Refer to Sentry Key

௡ “Customer Key Programming.”

If you do not have a programmed RKE transmitter,
contact your authorized dealer for details.

Transmitter Battery Service

The recommended replacement battery is one CR2032
battery.

NOTE:

• Perchlorate Material — special handling may apply.

See www.dtsc.ca.gov/hazardouswaste/perchlorate

• Do not touch the battery terminals that are on the back

housing or the printed circuit board.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

25

2

This manual is related to the following products: