Power supply precautions – Canon FS 2720 U User Manual
Page 7
7
CanoScan FS2720U Film Scanner
Power Supply Precautions
CAUTION
•
Do not score, damage or dismantle the power cord or plug. In addition, do not
place heavy objects on, twist or force the cord. There is a risk that short-circuits
from exposed wiring could lead to fire or electric shock.
•
Do not handle the plug with wet hands. There is a risk of electric shock.
•
Avoid plugging too many power cords into the same electrical outlet. There is
a risk of fire or electric shock.
•
Do not bunch up or knot the power cord. There is a risk of fire or electric
shock.
•
Insert the plug of the power cord all of the way into the electrical outlet. Loose
plugs may to lead to fire or electric shock.
•
Do not use a power cord other than the type shipped with the equipment. Use
of other cords may lead to fire or electric shock.
•
In principle, avoid using extension cords, which may lead to fire or electric
shock. If their use is unavoidable, limit the length to 5 meters (16 feet) or less.
In addition, unbunch the cords and ensure that power and extension plugs are
firmly connected. Do not use more than one extension cord in the same
electrical outlet.
•
Do not use extension cords in passageways or other locations where people
are likely to step on or trip over the cord and damage it. Short-circuits from
exposed wiring could lead to fire and electric shock.
ATTENTION
•
Do not use the equipment with electrical supplies exceeding the rated voltage.
There is a risk of fire or electric shock.
•
Ensure that you grasp the plug by its solid portion when unplugging the power
cord. Pulling it out by the cord may wear the cord, expose the insulation and
wiring, and lead to fire or electric shock.
•
Always leave a clear area around the electrical outlet so that the power cord
can be immediately unplugged if a contingency should arise.
•
Unplug the power cord from the electrical outlet at least once a year, and
clean the area around the base of the plug’s metal pins to ensure all dust is
remmoved. If dust accumulates in this area, it may result in a fire.