Chief Manufacturing PSH-2000 - Manual (Page 3)

Installation Instructions Model: PSH-2000
3
TOOLS REQUIRED FOR INSTALLATION
• Drill and 7/32" drill bit
• 13mm wrench
• 1/2" wrench
• Phillips screwdriver, #2
• M5 Hex Key (provided)
• 3/16" Hex Key (provided)
• 5/32" Hex Key (provided)
NOTE: Other tools may be required depending on your
method of installation.
PARTS
Unpack carton, inspect and verify contents
(See Figure 1). Read installation instructions completely.
If any listed parts are missing or damaged, contact Chief
Customer Service at 1-800-582-6480.
Table 1: Parts
Item Description Qty
10 PLATE, Wall 2
20 BRACKET, Static 2
30 BRACKET, Side Support 2
40 LATCH 2
50 SPACER, 0.194" ID x 0.375" OD x 0.032" 8
60 SCREW, Button Head Cap, 10-24 x 1/2" 8
70 SCREW, Phillips Pan Machine, 10-24 x 1-1/2" 2
80 SCREW, Button Head Cap, M8-1.25 x 25mm 6
90 BUTTON, Mounting 6
100 WASHER, Flat, Machine, M8 6
110 WASHER, Lock, Split, M8 6
120 NUT, Hex, Finished Standard, M8 6
130 SCREW, Button Head Cap, 5/16"-18 x 1/2" 24
140 KEY, Hex, M5 (Slightly larger than 150) 1
150 KEY, Hex, 3/16" 1
160 KEY, Hex, 1/8" 1
BOLTS, Hex Head Lag, 5/16" x 2-1/2"
(Required, not supplied) 8
WASHER, Flat, Machine, 5/16" (Required, not
supplied) 8
Figure 1: Parts
(10)
(20)
(30)
(40)
(80)
(90)
(100)
(110)
(120)
(130)
(140)
(150)
(160)
(50)
(60)
(70)