Gastroback 42439 Gourmet Tea Advanced Automatic User Manual

Page 17

›auto start‹ Feature

This feature allows you to program the specific time when the appliance will automatically

turn on and start either a tea brewing cycle or water heating cycle.
setting the ›auto start‹ Feature
1.

Press and hold the AUTO START button for 2 seconds. The button surround will illuminate

and the tea alert will sound.
2.

The LCD screen will display the AUTO START clock symbol and a blinking CURRENT

TIME and START TIME.
3.

To set the CURRENT TIME, press the left ARROW UP button to increase the time, or the

left ARROW DOWN button to decrease the time in 1 minute increments. Ensure the correct

›AM‹ or ›PM‹ is displayed.
note: Pressing and holding the ARROW UP button or ARROW DOWN button will increase

the scrolling speed.
4.

To set the START TIME, press the right ARROW UP button to increase the time, or the right

ARROW DOWN button to decrease the time in 1 minute increments. Ensure the correct

›AM‹ or ›PM‹ is displayed.
5.

Once current time and start time are programmed, press either the flashing HOT WATER/

Cancel or TEA/Cancel button to select which feature you would like to start at the program-

med time.
6.

The LCD screen will display the current time and start time, in addition to the AUTO

START symbol. The AUTO START button surround will illuminate and remain illuminated

until the START TIME is reached, indicating that the ›Auto Start‹ feature has been activated.
7.

Ensure that the Tea Maker is prepared with:

a. Sufficient water in the Glass Jug and tea leaves in the Basket for the tea brewing cycle

or,

b. Sufficient water in the Glass Jug for the water heating cycle.
note: Insufficient water may discolour your teamaker base!
8.

Once the selected START TIME is reached, the Tea Maker will automatically commence the

tea brewing or water heating cycle. During this time, the AUTO START button surround will

no longer illuminate until the cycle is complete.

re-selecting the ›auto start‹ Feature using Previous start time

Press the AUTO START button once. The HOT WATER/Cancel and TEA/Cancel buttons

will flash.
2.

Press either the HOT WATER/Cancel or TEA/Cancel button to re-select the the desired

function. The ›Auto Start‹ feature has now been re-set.
note: The ›Auto Start‹ feature can be canceled anytime by pressing the AUTO START but-

ton. The LCD screen will no longer display the AUTO START symbol and the AUTO START

button surround will cease to illuminate.