Gastroback 40975 Design Hand Blender Advanced Pro - Manual (Page 14)

31
10. Clean the appliance in accordance to the instructions in chapter ›Care and cleaning‹.
Do not leave any food to dry on the surface of the appliance.
processing guide for the chopper attachment:
food max. amount max. operation
meat 250 g 8 sec
herbs 50 g 8 sec
nuts 100 g 8 sec
cheese 100 g 5 sec
bread 80 g 5 sec
onions 150 g 8 sec
biscuits 150 g 6 sec
soft fruit 200 g 6 sec
care anD cleanIng
warnIng: To avoid injury to persons and damage, always release the ON-button, wait
for the motor to stop completely and unplug the appliance immediately after operation and
before laying down, dismantling or cleaning the appliance. With the appliance connected
to the power supply, do not touch the assembled tool with your hands or any objects.
note: The blades are very sharp. Do not touch the blades. Always handle the tools by
the shaft.
DO nOT clean the motor block, the stainless steel blender, the whisk hol-
der, the chopper lid or the power cord in an automatic dishwasher. Do not
immerse these parts in any liquids or spill any liquids on it. always wipe
off spilled liquids immediately. Do not pour or drip any liquids on the motor
housing or power cord. Do not place the appliance on wet or damp sur-
faces. when liquids are spilled on the motor housing, immediately unplug
the appliance and dry the motor housing to avoid risk of electric shock or
fire. always handle with care and without violence.
cauTIOn: Do not use abrasive cleaners, cleaning pads, corrosive chemicals (disinfec-
tants, bleach) or any sharp or hard objects (i.e. metal scouring pads) for cleaning, for this
could damage the surfaces.
note: after processing very salty ingredients clean the appliance immediately to avoid
stains and damage.
Carefully clean the appliance and the vessel with a damp sponge or cloth and warm soapy
water. Soak stubborn residues on the processing tools in warm dish-water for ca. 10 minutes
and then remove the residues with a soft washing brush.
1. Always release the ON-button, wait for the motor to stop completely and unplug the
appliance from the power outlet before cleaning.
cauTIOn: Always handle with care and without violence. To disassemble the processing
tools, press both release-buttons to release the lock.