Gastroback 40118 Easy Juicer - Manual (Page 8)

Step 5:
Raise the safety locking arm up and lock into the
two grooves on either side of the juicer cover. The
safety locking arm should now be in a vertical
position and locked into place on top of the juicer
cover (Picture 1 and 2).
Step 6:
Slide the food pusher down the feed chute by
aligning one of the grooves in the food pusher
with the small protrusion on the inside of the top
of the feed chute. Continue to slide the food
pusher down the feed chute (Picture 3).
Step 7:
Place the juice jug provided sideways under the
spout of the Easy Juicer. A graphic on the lid
shows where the juicer spout is to be placed.
Note the jug is designed to clip in under the
spout to give it a positive location. A glass
could also be used to collect the juice, but using
the jug and lid is recommended to avoid any
splatter.
1
2
4
8
Assembling your Gastroback Easy Juicer
3
Food
Pusher
Groove
Small protrusion inside feed tube.