Gastroback 42620 Design Espresso Advanced - Barista Edition User Manual

Page 22

The

-button will now pour the saved shot size when pressed, unless reprogrammed,

reset to the default settings), or overridden by the manual function.

reseTTing DefAulT volumes
To reset the machine to the default one and two shot pour quantities, press and hold the

PROGRAM-button until the machine beeps three times. Release button. This indicates the

machine has returned to its original default settings.

mAnuAl funcTion
The Manual function over-rides the preset shot size for one time only. It does not save the

shot size like in programming mode. Press and hold the

-button or

-button. Release

the button once sufficient espresso has flowed into the cup.

sTep 10 – empTYing THe porTAfilTer
• Remove the portafilter from the group head by rotating the portafilter to the left until it

releases.
• To empty the used grounds, turn the portafilter upside down in a bin and gently knock out

the grounds. Used grounds should be thrown away with domestic waste. Discarding of used

grounds in a sink can cause drains to become blocked.
• With the filter still in place, hold the portafilter underneath the group head, press and hold

down the one cup button to release hot water. Rinse the portafilter until water runs clear.
• Insert the portafilter back into the group head to dry out and keep warm.

wArning:

THe meTAl pArTs of THe porTAfilTer will Be verY HoT.

THe ArT of TeXTuring milK

The appliance comes complete with a commercial style swivel steam wand.
• Fill the stainless steel frothing jug maximum ½ full with cold, fresh milk.
• Turn the steam selector dial to the Steam-position. The red steam light

will start to flash indicating that the machine is heating to create steam.
• When the steam light stops flashing it is ready to use.
• Before inserting the wand into the milk, pause the steam by returning

the dial back to the STAND BY-position. This will avoid splashing the

milk out of the jug (this pause function lasts for 6 seconds before exiting

steam mode).
• Insert the wand into the milk and return the Steam dial back to Steam-position.
• To stop, return the steam dial to the STAND BY-position and remove the jug.
note: When the espresso machine creates steam, a pumping noise can be heard. This is

the normal operation of the 15 Bar pump.
note: After 5 minutes of continuous steaming, the machine will automatically disable the

steam function. The steam light will flash. When this occurs return the steam dial to the

STAND BY-position.