Vermont Casting BHDT36 User Manual

Page 26

- 26 -

OFF

PILOT

LAVA ROCK

The lava rock provided with this fireplace must be placed
on the firebox base on either side of the burner assem-
bly.

Under no circumstances should this

lava rock be placed on any part of the
burner assembly.

INSTALLATION OF LOGS

Fig. 58

FLAME ADJUSTMENT

For fireplaces equipped with Hi/Lo valves, flame adjust-
ment is accomplished by rotating the Hi/Lo adjustment
knob located near the centre of the gas control. Fig. 59/
60.

Fig. 59

1 . Remove front glass. (See "Glass Removal" Section)
2.

Remove logs from the packaging.

As with all plastics — these are not toys
and should be kept away from children
and infants.

Place rear log (BH2) on rear bracket (ensure log is
seated properly, leveled and centered to the unit), so
it will not move from side to side and it is firmly
positioned on the bracket.

Place front log (BH1) on front log support. Use log's
bottom holes to locate it.

Place top left log (BH3) onto locator notches. Ensure
log is secure.

Place top right log (BH4) onto locator notches. Ensure
log is secure.

BH3

BH4

BH2

BH1

SIT VALVE

Turn

counterclockwise

to decrease

flame height

Turn clockwise

to increase

flame height

Honeywell Valve

HONEYWELL VALVE

Fig. 60