ETS-Lindgren HI-3604 ELF Survey Meter - Manual (Page 26)

Page -- 18 HI-3604 Manual
one second followed by the stored value. Immediately upon
releasing the key, a new value may be logged by again pressing
the LOG pad. Up to 112 values can be stored in this memory.
When the memory is filled, successive operations of the LOG
key will store the most current reading in memory location 112.
PREV - Pressing the PREV key displays the last stored data
value. When the key is pressed, the identification number of the
value is first displayed for about one second followed by the
stored value. The stored value is displayed as long as the key is
depressed. About two seconds after releasing the key, the
display returns to the current reading. Successive operations of
the key will move the displayed value down towards the
beginning of the memory (value identification #1). If the PREV
key is operated while viewing value #1, the identification value
will "wrap around" to the highest stored identification number.
NEXT - Pressing the NEXT key displays the next value in the
data logging memory. If the NEXT key is operated while viewing
the last stored value, the identification number will "wrap
around" to value number one.
When the displayed value is below 5% of the current full scale,
the arrow at the left end of the BarGraph display will indicate.
When the "Below Range" arrow is indicating, the accuracy of
the reading may not be within the specified tolerance. When
possible, the scale should be changed to permit a normal field
strength reading without the "Below Range" indication. If the
displayed value is too high the " Over Range", the arrow at the
right end of the BarGraph, will indicate. Select the next
appropriate scale.