Elecraft W2 Watt-meter Manual - Manual (Page 19)

19
Cables
These cables are provided with both the factory-assembled and kit versions of the W2.
ILLUSTRATION DESCRIPTION QTY.
ELECRAFT
PART NO.
Power Cable (An RCA connector is
included for use with rigs such as
the K3 that have a female RCA
power jack for accessories)
1 E850361
Sensor Cable (this cable may be
packaged with each sensor) 1 per
Sensor
E850368
OR
USB RS232
Serial Data Cable Assembly. USB
interface provided unless RS232
specified at the time order is placed.
1
E850483
(USB)
Or
E850369
(RS232))
Sensors
ILLUSTRATION DESCRIPTION QTY.
ELECRAFT
PART NO.
Directional Coupler 1.8-54 MHz
200 W
See note
E850364
Directional Coupler 1.8-54 MHz
2KW
E850365
Directional Coupler 144-450 MHz
200 W
E850370
Note: Up to two sensors may be connected to one display unit.