Dynojet 250: Eddy Current Brake Driveline Upgrade - Manual (Page 15)

D R I V E L I N E U P G R A D E I N S T A L L A T I O N
Install the Driveline and Brace Upgrade
Version 1 Model 250 Eddy Current Brake Driveline Upgrade Installation Guide
11
4 Secure the top hood extension to the brake and dyno hoods using five
1/4-20 x 3/4-inch button-head screws and five 1/4-20 nuts.
Figure 11: Install the Top Hood Extension
5 Carefully place the fully assembled hood on the dyno leaving it propped up.
Secure the key switch, if present.
6 Lower and secure the hood using the four bolts removed earlier.
Note: Verify the hood is not pinching or contacting any cables or wires.
Figure 12: Secure the Hood Assembly to the Dyno
top hood extension