Dave Smith Instruments MONO EVOLVER KEYBOARD - Manual (Page 16)

Global Parameters
To edit the Global parameters, press the G
LOBAL switch. The P ARAM 1 knob changes
the parameter on the upper LCD line, and the P ARAM 2 knob changes the lower
parameter. Use the +/Y ES and -/N O switches to change pages.
Note: If you hold the -/N O switch while you hit the +/Y ES switch, it will jump to the
last page. Similarly, if you hold the +/Y
ES
switch when you hit the -/N
O
switch, it
will jump to the first page.
Page 1:
Transpose: xx
Fine Tune: xx
Transpose: -36…+36 – Master Transpose control, 0 is centered. Steps in semitones.
Fine Tune: -50…+50 – Master Fine Tune control; 0 centered. Steps in cents (50
cents = ½ semitone).
Page 2:
MIDI Channel: xx
Poly Chain: xx
MIDI Channel: ALL, 1…16 – Selects which MIDI channel to send and receive data, 1
to 16. All receives on any channel.
Poly Chain: Off, 2…20 – Use this to link multiple Evolvers and/or Poly Evolvers into a
system with more voices by intelligently processing the keys hit and passing MIDI
data through to the Poly Chain MIDI out jack, where it can be routed to another
Evolver or Poly Evolver. Note that MIDI clocks are handled separately per the MIDI
Clock parameter. Check page
5 for more details.
If Poly Chain is set to Off, the Poly Chain MIDI out jack duplicates the MIDI out jack.
Page 3:
Clock: xxxxxxxx
Prog Tempo: xx
Clock: see table – Selects the MIDI clock status, and enables External sequencer
triggers, as follows:
Display MIDI Clock Setting
Internal MIDI clock is neither sent nor received
MIDI Out MIDI clock is sent
MIDI In MIDI clock is received
MidiIn/Out MIDI clock is received and transmitted (use
with Poly Chain)
MidInNoS/S MIDI clock is received, but MIDI
start/stop/continue messages are ignored.
10