beautypg.com

Dave Smith Instruments MONO EVOLVER KEYBOARD User Manual

Page 17

background image

Prog Tempo: Off, On – When set to Off, changing a Program will not change the
tempo- this is useful for keeping a constant tempo but using different sounds. If set to
On, a Program change will change the tempo to the BPM and Clock Divide values
saved with the Program. When on, changing the main BPM will also change the
Program BPM, and vice-versa. When off, changing one has no effect on the other.

Page 4:

Tempo (BPM): xxx
Clock Div:xxxxxx


Tempo: 30…250 – Sets the basic speed for the sequencer in BPM. Actual speed also
depends on the Clock Divide setting. If using MIDI clock, it will display the BPM of the
incoming MIDI clocks. If Prog Tempo is On, the Tempo and Clock Divide will both be
updated on every Program change.

Clock Divide: see table – Used as a clock divider to provide a wider range of
sequencer speeds. When set to Quartr (quarter notes), the BPM setting is exact, i.e.
120 BPM = 120 BPM. If set to Half (half note), the actual speed is half, so a setting of
120 BPM will actually play at 60 BPM.

Swing settings add a delay to every the odd steps (1, 3, 5, and so on), while
shortening the even steps by the same amount, for a swing feel to the timing. Half
swing is the same with less delay.

Here are all the possible settings, with the effect on the overall tempo:

Display

Tempo

Timing Division

Half

BPM/2

Half note

Quartr

BPM

Quarter note

Eighth

BPM x 2

Eighth note

8 half

BPM x 2

Eighth note, half swing timing

8swing

BPM x 2

Eighth note, full swing timing

8 trip

BPM x 3

Eighth note triplets

16th

BPM x 4

Sixteenth note

16half

BPM x 4

Sixteenth note, half swing timing

16swng

BPM x 4

Sixteenth note, full swing timing

16trip

BPM x 6

Sixteenth note triplets

32nd

BPM x 8

Thirty-second note

32trip

BPM x 12

Thirty-second note triplets

64trip

BPM x 24

Sixty-fourth note triplets

Page 5:

MIDI Program:xxx
MIDI Pressure:xx


MIDI Program: Off, On – When On, the synth will respond to MIDI program changes
received, and will transmit Program changes to MIDI Out.

11