Dave Smith Instruments MOPHO - Manual (Page 9)

Getting Connected
Mopho has several inputs and outputs on its back panel.
Power Input — Connect the power supply included with your Mopho. The
power supply comes with different AC adaptor prongs that enable it to work
almost anywhere in the world. If for whatever reason you need to use a different
supply, it must match the specifications printed on the front panel.
Note: The power supply label says “Evolver” on it; we use the same
supply for the mono Evolvers, the Prophets, and Tetra.
MIDI In — To receive MIDI data from another device, connect this to the other
device's MIDI Out.
MIDI Out — To send MIDI data to another device, connect this to the other
device's MIDI In. This output can also be configured as a MIDI Thru using the
MIDI Out Select parameter in the Global menu.
Audio In — Mopho can be used as a signal processor. Audio is routed through
the filter and envelopes and, when the signal level is high enough, a gate is
generated. Audio can also be used to advance the sequencer when Seq Trigger is
set to Audio In.
Note: Though Mopho can process external audio, it does not have a pitch
detector, so the oscillators do not track the pitch of the source audio.
Audio Out — Mopho’s unbalanced, stereo outputs.
Phones — A 1/4 inch stereo headphone jack.
3