Cuddeback E FAMILY - Manual (Page 20)

g. LOAD F/W – Press UP or DOWN to
load a new firmware from a SD Card.
See Appendix A: Firmware section in
the manual.
h. SETUP – Press UP or DOWN to select
EZ MODE or ADV MODE.
i. CAM ID – Select a number from 0 to 250
to have printed on to the image. This can
be used for easier image identification.
j. RESET – press UP or DOWN to reset
the camera to factory defaults.
k. STATS – Press UP or DOWN to view
statistics about your camera. Displayed are
Activation Date, Run Days, Lifetime Images
taken, & Lifetime Flash Images taken.
Settings Menu
Advanced mode enables additional SETTINGS
menu items that provide more versatile camera
deployment. (We recommend reading this entire
section first and then read it again while working
with your camera.)
1. Press MODE until SETTINGS LED is illuminated
2. ADV MODE will be displayed. Press MORE
consecutive times to view the available settings.
a. DAY will be displayed to indicate that the
next settings only affect daytime camera
operation.
a.i. D/ DELAY
a.ii. D/ IMAGE
a.iii. D/ VIDEO
a.iv. D/ LAPSE
b. NIGHT will be displayed to indicate that
the next settings only affect nighttime
camera operation.
b.i. N/ DELAY
b.ii. N/ IMAGE
b.iii. N/ VIDEO
b.iv. N/ LAPSE
36 37