Copernicus VBC5600 User Manual
Page 2
1
Insert Casters into the End Frames
- Push each caster in by hand until fully seated
2
Install the 6 Tub Stop Rods
-Use acorn nuts and lock washers
-Hand tighten only
3
Install the 6 Tub Supports to the End Frames
- Use 40mm bolts, and lock washers
- Hand tighten only
4
Tighten All Fasteners
- NOTE: 24 in total
- Use the included assembly wrench for the bolts (12)
- Use an adjustable wrench for the acorn nut (12)
5
Install the Book Display Racks
- Hook the top of each rack over the upper rods
6
Secure the Book Display Racks
- Use cable ties (2 for each rack)
- Wrap each tie around the rack and lower rods
- Pull tightly
- Trim the ends with scissors
5
6
1
3
2
NOTE: Do not tighten any fasteners until the unit is completely assembled
Visit www.copernicused.com to browse our entire line of educational aids
PULL
TIGHT