Code 3 XT308 - Manual (Page 3)

ON/OFF/PATTERN SELECT MODULER:
DN= Turn the 2 position switch to off / Turn the 3 position switch to DOWN position.
UP= Turn the 2 position switch to on / Turn the 3 position switch to UP position.
X = Turn the 3 position switch to MIDDLE position.
The 3 position rocker switch in UP mode is in DIM state / in DN mode is in BRIGHT state.
Touching the yellow wire to the black wire (ground) will change the flash patterns.
Switch Position
ON/OFF
FLASH
CENTER
LEFT
CENTER
RIGHT
Operation NOTE
X DN DN OFF OFF
DN DN DN FLASH (BRIGHT)
UP DN DN FLASH (DIM)
P1 P5 P9 P13 P17 P21 P25 P29
DN UP DN RIGHT SWEEP(BRIGHT)
UP UP DN RIGHT SWEEP(DIM)
P2 P6 P10 P14 P18 P22 P26 P30
DN DN UP LEFT SWEEP(BRIGHT)
UP DN UP LEFT SWEEP(DIM)
P3 P7 P11 P15 P19 P23 P27 P31
DN UP UP CENTER (BRIGHT)
UP UP UP CENTER (DIM)
P4 P8 P12 P16 P20 P24 P28 P32
LAMP 8 LAMP 1 LAMP 2 LAMP 3 LAMP 4 LAMP 5 LAMP 6 LAMP 7
LIGHT ARRAY
XT308AS FLASH PATTERN
P4: CENTER GROUP #1
ONE LAMP SEQUENCE TO DOUBLE FLASH
(Flash UP or DN / Left turn on / Right turn on)
P1 : FLASH (Flash UP or DN / Left & Right all turn off) Individual lamps light sequentially from Center to bipartite
with the last lamp displaying a double flash pattern. Alternating pairs of lamps light.
EX : 4+5 - 3+6 - 2+7 - 1+8 - 1+8 EX : 4+5 - 4+5 - 2+3+6+7 - 2+3+6+7
P2 : RIGHT SWEEP GROUP #2 TWO LAMP SEQUENCE
P5 : FLASH
(Flash UP or DN / Left turn off / Right turn on)
Individual lamps light sequentially from Left to Right with
the last lamp displaying a double flash pattern.
(Flash UP or DN / Left & Right all turn off)
Alternating pairs of lamps light.
EX : 4+5 - 2+3+6+7 EX: 2→3→4→5→6→7→8→8
P3: LEFT SWEEP P6: RIGHT SWEEP
(Flash UP or DN / Left turn off/ Right turn on) (Flash UP or DN / Left turn on / Right turn off)
Dual lamps light sequentially from Left to Right with the last
lamp displaying a double flash pattern
Individual lamps light sequentially from Right to Left with
the last lamp displaying a double flash pattern.
EX: 2→2+3→3+4→4+5→5+6→6+7→7+8→8→8 EX : 7→6→5→4→3→2→1→1