Code 3 XCEL - Manual (Page 8)

8
WARNING
!
Connection of a 58 watt speaker to the siren amplifier will cause the speaker to burn out, and will void the speaker
warranty!
WARNING
!
Any electronic device may create or be affected by electromagnetic interference. After installation of any electronic
device, operate all equipment simultaneously to insure that operation is free of interference.
WARNING
!
Utilizing non-factory specified screws and/or mounting brackets and/or the improper number of screws may result in
failure of the mounting system and severe damage to the vehicle as well as loss of warranty coverage on the equipment.
Amplifier Power Distribution
The Level 1, 2, 3A and 3B outputs can supply a maximum of 15 Amps each or a combined total of 50 Amps. Each Level has a 20 Amp fuse installed
inside the Amplifier. Fuses may be accessed through the panel on top of the Amplifier.
The Auxiliary outputs A, B, C, D, E, and F can supply a maximum of 10 amps each or a combined total of 60A. Auxiliary outputs A, B, C, D, E, and F
have 15 amp fuses. Fuses may be accessed through the panel on top of the Amplifier.