Code 3 XCEL - Manual (Page 11)

11
Siren Specifications
Siren Section:
Input Voltage 10 to 16 VDC and ground - 12V units
(Note: Operation of 12V units above 15 VDC for an extended period of time may result in speaker damage.)
Operating Current 100W: 8 Amps @ 13.6V with 11-ohm load (100 Watt Speaker) - 12V units
200W: 14 Amps @ 13.6V with 5.5-ohm load (2-100 Watt Speakers) - 12V units
(NOTE: There is no 58 Watt speaker connection available.)
Standby Current Ignition On < 200mA
Ignition Off < 3mA
Cycle Rate Wail - 11 cycles/minute
Yelp - 200 cycles/minute
Voltage Output ~ 66 Vpp
Lighting Specifications
Warning Light Control: 3-Level Switch, 4 Outputs, 50 Amps maximum combined total
Level 1 & 2: 15 Amp Maximum Each Level
Green (1) & Yellow (2) LED Indication
Level 3A & 3B: 15 Amp Maximum Each Level
Red (3) LED Indication
AUX A thru F: 10 Amp Maximum Each Aux
60 Amp Maximum Total
System - Weight: Siren 4.5 lbs (1.9 Kg)
Boxed Unit 6.0 lbs (4.3 Kg)
Size: Amplifier 5.585”L x 6.520”W x 2.765”H
Temperature: -22F thru +149F (-30C thru +65C) SAE Equipment Type EVS1