Code 3 Sprinter 24 Volt User Manual
Page 16
![background image](/manuals/635350/16/background.png)
PROGRAMMING STEP #7:
ENABLES PROGRAMMING OF THE EMERGENCY key:
the following keys will be illuminated:
EMERGENCY (will be illuminated Indicating Step #7 in
Pressing any key
along with other any
programming mode.
in EMERGENCY
other
keys
programmed
programming
mode
into
the
light
list.)
will
include
that
key
function
in
the
list
of
functions
for
the
EMERGENCY
key.
Headlight Flasher:
If the vehicle is equipped with a headlight flasher, pressing both the left and right arrow keys
at the same time will enable this function when the EMERGENCY key is selected and will
illuminate the ALT key to indicate such.
Intersection Lights:
If the vehicle is equipped with intersection lights, pressing both the SEC & TAKEDOWN keys
at the same time will enable this function when the EMERGENCY key is selected.
(No indication is displayed for this function.)
Changing the initial condition of the SIREN tone from WAIL to YELP
Can be done by pressing the key to the following conditions:
WAIL/YELP key;
Illumination condition: OFF
Indicates: Siren tone off
Illumination condition: ON
Indicates: setting to WAIL tone
Illumination condition: FLASHING
Indicates: setting to YELP tone
When finished
press
ALT
to
save
settings
or
to
exit
without
saving
press
CLEAR.
PROGRAMMING STEP #8:
ENABLES AUTO-LIGHT FEATURE TO BE TURNED OFF OR ON
Description of condition:
If Auto Light feature is activated: the siren will automatically turn on the lights programmed for the
SEC key on the control head any time the WAIL/YELP key or SIREN 2 key is pressed.
The Following keys will be lighted indicating STEP #8 in the Programming sequence:
WAIL /YELP will be lighted
SIREN 2 will be lighted
SEC will NOT be lighted – indicating that the AUTO- LIGHT feature is disabled.
Pressing the SEC key will cause the SEC key to be lighted – along with the WAIL/YELP and SIREN 2
keys at the same time, indicating that the AUTO-LIGHT feature has been enabled.
Press ALT key to exit programming and save or press CLEAR to exit programming without saving.
16