Code 3 Intrepid - Manual

INSTALLATION &
OPERATION MANUAL
1
Intrepid TM Series Interior Lights
WARNING: This product contains high intensity LED devices. To prevent eye damage, DO NOT stare into the light
beam at close range.
WARNING: The use of this or any warning device does not ensure that all drivers can or will observe or react to an
emergency warning signal. Never take the right-of-way for granted. It is your responsibility to be sure you can pro-
ceed safely before entering an intersection, driving against traffic, responding at a high rate of speed, or walking on or
around traffic lanes. The effectiveness of this warning device is highly dependent upon correct mounting and wiring.
Read and follow the manufacturer’s instructions before installing or using this device. The vehicle operator should
insure daily that all features of the device operate correctly. In use, the vehicle operator should insure the projection of
the warning signal is not blocked by vehicle components (i.e.: open trunks or compartment doors), people, vehicles, or
other obstructions. This equipment is intended for use by authorized personnel only. It is the user’s responsibility to
understand and obey all laws regarding emergency warning devices. The user should check all applicable city, state
and federal laws and regulations. Code 3, Inc., assumes no liability for any loss resulting from the use of this warning
device. Proper installation is vital to the performance of this warning device and the safe operation of the emergency ve-
hicle. It is important to recognize that the operator of the emergency vehicle is under psychological and physiological
stress caused by the emergency situation. The warning device should be installed in such a manner as to: A) Not reduce
the output performance of the system, B) Place the controls within convenient reach of the operator so that he can op-
erate the system without losing eye contact with the roadway. Emergency warning devices often require high electrical
voltages and/or currents. Properly protect and use caution around live electrical connections. Grounding or shorting
of electrical connections can cause high current arcing, which can cause personal injury and/or severe vehicle dam-
age, including fire. PROPER INSTALLATION COMBINED WITH OPERATOR TRAINING IN THE PROPER USE OF EMER-
GENCY WARNING DEVICES IS ESSENTIAL TO INSURE THE SAFETY OF EMERGENCY PERSONNEL AND THE PUBLIC.
INSTALLER: This manual must be delivered to the end user of this equipment.
WARNING: This unit must be mounted within the interior passenger compartment of the vehicle only. It is not intended
for use in exterior applications. All devices should be mounted in accordance with the manufacturer’s instructions
and securely fastened to vehicle elements of sufficient strength to withstand the forces applied to the device.
THIS UNIT IS NOT DESIGNED TO BE SUSPENDED BY THE SUCTION CUPS ABOVE THE
DASHBOARD. WHEN USING THE SUCTION CUPS FOR INSTALLATION, THE UNIT IS
TO BE PLACED ON TOP OF THE DASHBOARD. THE SUCTIONS CUPS ONLY PREVENT
MOVEMENT OF THE UNIT.
Driver and/or passenger air bags (SRS) will affect the way equipment should be mounted. This device should be
mounted by permanent installation and within the zones specified by the vehicle manufacturer, if any. Any device
mounted in the deployment area of an air bag will damage or reduce the effectiveness of the air bag and may damage
or dislodge the device. Installer must be sure that this device, its mounting hardware and electrical supply wiring does
not interfere with the air bag or the SRS wiring or sensors. Mounting the unit inside the vehicle by a method other
than permanent installation is not recommended as unit may become dislodged during swerving, sudden braking or
collision. Failure to follow instructions can result in personal injury.