Code 3 Halogen Single Bulb Work Light - Manual

INSTALLATION MANUAL
MINI HALOGEN WORK LAMP
www.code3pse.com
Tech Support: (314) 996-2800
Revision 0, 09/11 - Instruction Book Part No. T15479
©2011 Public Safety Equipment, Inc. Printed in USA
Code 3®, Inc.
10986 N. Warson Road
St. Louis, Missouri 63114-2029—USA
Ph. (314) 426-2700 Fax (314) 426-1337
www.code3pse.com
WIRING:
1. WIRE GAUGE: USE MINIMUM 14 GAUGE WIRE & CONNECTORS
2. CONNECT RED (+) WIRE TO POSITIVE OR POWER.
CONNECT BLACK (-) WIRE TO NEGATIVE OR GROUND.
3. FUSE REQUIREMENTS: 10AMP FUSE.
4. WEATHER RESISTANT CONNECTORS RECOMMENDED.
Mini Halogen Work Lamp
FLOOD---MODEL # = CWL111FL
SPOT-----MODEL # = CWL111SP
6.0"High X 3.6"Wide X 3.4"Deep
(1) 55 Watt H3 Halogen Lamp
Operating Voltage : 12V
NOTE: IT MAY BE NECESSARY TO CLIP TERMINALS OFF ENDS OF WIRES
Code 3 is a registered trademark of Code 3, Inc.
a subsidiary of Public Safety Equipment, Inc.
Adjustable 180 Degrees
Vertically
Adjustable 360 Degrees
Horizontally
HAT BRACKET
2 3/4"
TO MOUNT WITH HAT BRACKET
DRILL (2) 21/64" DIA HOLES
AT DESIRED LOCATION.
TO MOUNT WITHOUT HAT BRACKET
DRILL (1) 13/32" DIA HOLE
AT DESIRED LOCATION.
MOUNTING: