Code 3 Frontier LED Mini Bar - Manual (Page 5)

5
TROUBLESHOOTINg
Problem Probable Cause Remedy
Lighthead does not activate a. No power to unit a. Check wire for loose connection
b. Power input wire reversed b. Reverse power wires
c. Damaged or shortaged cabling c. Check cables for damage
d. Defective lighthead d. Contact Service Dept.
Pattern does not change a. Unit in Lock Mode a. Unlock Flash Patterns
LED module housings may become hot with extended use. Allow modules to cool completely
before attempting to remove.
WARNING!
Maintenance:
The beacons are completely sealed units designed to be maintenance free. Refer to the guide below for help
with troubleshooting. Should the unit be diagnosed as malfunctioning, remove unit and replace with a new
module.