Code 3 Essex Headliner Mounting Bracket - Manual (Page 2)

Problems or Questions? Call The Technical Assistance
HOTLINE - (314) 996-2800
Code 3, Inc.
10986 N. Warson Road
St. Louis, Missouri 63114-2029—USA
Ph. (314) 426-2700 Fax (314) 426-1337
www.code3pse.com
Code 3,® Inc., a subsidiary of
Public Safety Equipment, Inc.
Revision 0, 6/2011 - Instruction Book Part No. T52243
©2010 Public Safety Equipment, Inc. Printed in USA
Code 3 is a registered trademark of
Code 3, Inc.
2
S13963M
Installation to the vehicle will use the
existing vehicle visor mounting hardware
T00763
T52239
T00763
Installation - Essex Dual Light Head
Ford Crown Vic - 2006 thru 2011
Installation Steps:
1. Assemble S13963M onto the top of
dual light head using qty 2 PN T00763 8-
32 x 0.625" Machine Screws.
2. Assemble T52239 Retention Strip onto
the bottom of the dual light head using
qty 1 PN T00763 8-32 x 0.625" Machine
Screw.
3. Remove existing vehicle mounted
visor fasteners and clips.
4. Place assembled light head against
headliner and reinstall vehicle mount
fastners and clips through cut-out in
S13963M bracket.
5. Secure.