Code 3 E-10 Beacon Series - Manual (Page 4)

4
PRODUCT RETURNS
If a product must be returned for repair or replacement*, please contact our factory to obtain a Return
Goods Authorization Number (RGA number) before you ship the product to manufacturer. Write the RGA
number clearly on the package near the mailing label. Be sure you use sufficient packing materials to avoid
damage to the product being returned while in transit.
*Manufacturer reserves the right to repair or replace at its discretion. Manufacturer assumes no responsibility or liability for expenses
incurred for the removal and /or reinstallation of products requiring service and/or repair; nor for the packaging, handling, and shipping;
nor for the handling of products returned to sender after the service has been rendered.
WARRANTY
Manufacturer's emergency devices are tested and found to be operational at the time of manufacture. Provided
they are installed and operated in accordance with manufacturer's recommendations, manufacturer guarantees
all parts and components except the lamps to a period of 90 days (unless otherwise expressed) from the date of
purchase or delivery, whichever is later. Units demonstrated to be defective within the warranty period will be
repaired or replaced at the factory service center at no cost.
Use of lamp or other electrical load of a wattage higher than installed or recommended by the factory, or
use of inappropriate or inadequate wiring or circuit protection causes this warranty to become void. Failure or
destruction of the product resulting from abuse or unusual use and/or accidents is not covered by this warranty.
Manufacturer shall in no way be liable for other damages including consequential, indirect or special damages
whether loss is due to negligence or breach of warranty.
MANUFACTURER MAKES NO OTHER ExPRESS OR IMPLIED WARRANTY INCLUDING, WITHOUT LIMITATION,
WARRANTIES OF FITNESS OR MERCHANTABILITY, WITH RESPECT TO THIS PRODUCT.
Revision 0 09/02/2010 - Instruction Book Part No.T89986