Code 3 Chase - Manual (Page 2)

Wire:
920-1003-00 Rev. A Page 2 of 5
1 Light Head
2 Screws
1 Installation Guide
1 Mounting Gasket
1 Flange
CONTENTS:
Input Voltage 12-24VDC
Work Current 0.9A Max @ DC12V
0.5A Max @ DC24V
Physical H x W x L 1.07 in x 1.48 in x 6.38 in
2.76 cm x 3.75 cm x 16.2 cm
Ship Weight 0.463 lb (0.21 Kg)
SPECIFICATIONS:
Important!
This unit is a safety device and it must be
connected to its own separate, fused power point to assure its
continued operation should any other electrical accessory fail.
Caution:
When drilling into any vehicle surface, make sure the
area is free from any electrical wires, fuel lines, vehicle upholstery,
etc. that could be damaged
Mounting:
RED: Positive, Colors 2 & 4 (need to add 5A fuse)
WHITE: Positive, Colors 1 & 3 (need to add 5A fuse)
BLACK: Negative
BLUE: Pattern Switch
YELLOW: Synchronized Function
(Up to 8 units can be Synchronized)
Phase Operation:
Phase 1 (Ph1) fl ashes simultaneously with Ph1
Phase 2 (Ph2) fl ashes simultaneously with Ph2
Ph1 alternates with Ph2
(Up to 8 units can be Synchronized)
Apply BLUE TO BLACK wire:
-Less than 1 sec. for next pattern
-Between 1-3 sec for previous pattern
-Between 3-5 sec. for factory default (P64)
-More than 5 sec. for turn off
Operation Environment:
Ambient Temperature: -30 to 50°C
LED Color 1 & Color 3
LED Color 2 & Color 4