Catler KM 8011 - Manual (Page 18)

18
ASSEMBLY & OPERATION
DISASSEMBLING THE MIXER
1. When mixing is complete, turn the speed
control dial to the OFF|STANDBY position,
switch the appliance off at the power
outlet and unplug the cord.
2. To remove splash guard, separate the
pour spout, then slide main ring out of
position.
3. Raise the mixer motor head by pressing
the RELEASE button. Lift the motor head
up until it locks into the open position.
4. Remove the mixing or whisking tool
by holding the mixer motor head and
pressing the tool upwards on the spindle.
Then turn the attachment anti-clockwise
to release it from the pin on the spindle.
5. Use a soft plastic spatula to remove
mixture from the beater, dough hook or
whisk attachment.
6. Release and remove the mixing bowl
from locking recess on mixer base by
turning anti-clockwise.
7. Use a soft plastic spatula to remove
mixture from the mixing bowl.
8. Lower the mixer motor head by pressing
the RELEASE button and lowering the
mixer motor head down until it locks into
the horizontal position.
9. When lowering or lifting the mixer,
always support the motor head with your
other hand to prevent from free-falling.
WARNING:
Avoid contact with beater/dough
hook/whisk during operation. Keep
hands, hair, clothing, spatulas and
other utensils out of the way to
prevent personal injury or damage to
the mixer.