Catler FP 4010 - Manual (Page 19)

19
1. Holding the outer leg and insert the
gearbox making sure ALIGN arrows are
aligned.
2. Hold both outer leg and gearbox fi rmly
with one hand and insert inner leg until
it clicks and locks into place.
3. Rotate gearbox while holding outer leg
to lock into place until it clicks.
4. Align the mashing leg with the motor
body and push the two parts together
until it clicks.
5. Place blade on underside of the mashing
head. To lock the blade rotate in
a anticlockwise direction. Blade will not
attach if the leg is not attached to the
motor body.
ASSEMBLY & OPERATION