Catler MF 8010 - Manual (Page 5)

55
CATLER RECOMMENDS SAFETY FIRST
CATLER RECOMMENDS SAFETY FIRST
We at Catler are very safety conscious. We design and manufacture consumer products with the safety of you, our valued customer foremost in mind. In
addition we ask that you exercise a degree of care when using any electrical appliance and adhere to the following precautions:
IMPORTANT SAFEGUARDS FOR YOUR MILK FROTHER MF 8010
• Carefully read all instructions before opera-
tion and save for future reference.
• Remove and safely discard any packaging
material and promotional labels before using
the appliance for the first time.
• To eliminate a choking hazard for young
children, remove and safely discard the pro-
tective cover fitted to the power plug of this
appliance.
• This appliance has been designed specifi-
cally for the purpose of foaming milk and
other dairy milk alternatives only. Under
no circumstances should this product be
used to thicken or heat other food or liquid
substances e.g. cream, custards, soups and
gravies etc.
• This appliance is not designed to mix a large
quantity of dry ingredients or melt large food
pieces e.g. cubed chocolate, ground nuts,
whole spices, fresh herbs.
• Do not place the appliance near the edge of
a bench or table during operation. Ensure
that the surface is level, clean and free of
water.
• Do not place the appliance on or near a hot
gas burner, electric element or where it could
touch a heated oven.
• Keep the appliance clear of walls, curtains
and other heat or steam sensitive materials.
Minimum recommended distance is 20 cm.
• Do not operate the appliance on a sink drain
board.
• Before you connect the appliance into the
power outlet make sure the voltage on the
rating label corresponds to the voltage in
your power outlet.
• Always ensure the appliance is properly
assembled before connecting to a power
outlet and operating. Follow the instructions
provided in this book.
• This appliance is not intended to be operated
by means of an external timer or separate
remote control system.
• The underside of the jug must always be dry
before placing onto power base before use.
• The jug must be used only with the power
base supplied together with the jug. Do not
use this supplied power base and the jug for
other types of appliances unless the manu-
facture recommends otherwise.
• Before operation, ensure the jug lid is securely
attached to the jug. During heating do not
open the jug lid or do not manipulate in
any way. Scalding may occur from escaping
steam. Do not place anything on top of the lid.
• Do not touch hot surfaces. Use the handle for
lifting and carrying the appliance.
• Use caution when pouring foamed milk from
the jug after heating as hot milk may scald at
high temperatures.
• Do not move the appliance if turned on. Do
not manipulate with the appliance if placed
on the power base and turned on.
• Do not operate the appliance without liquid.
Always fill to at least the ‘MIN’ marking and
no more than the ‚MAX‘ marking inside the
jug to avoid scalding. Should it be operated
empty, the boil dry protection will shut the
power off automatically. Allow the appliance
to cool before refilling.
152185_MF_8010_EN_.indd Odd1:5 152185_MF_8010_EN_.indd Odd1:5 6.5.11 16:41 6.5.11 16:41