Catler ES 8013 - Manual (Page 32)

32
CARE & CLEANING
Concentrated Solution (for harder water)
• 1 part white vinegar
• 1 part cold tap water
WARNING:
Do not immerse power cord, power
plug or appliance in water or any
other liquid. The water tank should
never be removed or completely
emptied during decalcifying.
DECALCIFYING THE MACHINE
• Remove the portafi lter and frothing
attachment. Pour the mixture of white
vinegar and water into the water tank.
• Plug the machine into the power outlet
and switch On.
• Press the POWER button to the On
position.
• Place a large container under the group
head and steam wand.
• When the brewing temperature has
been reached all the button surrounds
on the control panel will illuminate. Press
and hold the 1 CUP or 2 CUP button to
commence manual pour. Release the
button once half the mixture of white
vinegar and water has run through the
group head.
• Set the steam dial to the STEAM position
and allow steam to run through the
Steam Wand for approximately
2 minutes. Return the steam dial back
to the STANDBY position.
• After decalcifying, remove the water tank
and rinse thoroughly then refi ll with fresh
cold water. To rinse the machine, repeat
previous steps.