CASO Germany PRO Slide 2100 - Manual (Page 44)

caso ProSlide 2100 44
15 Cleaning and Maintenance
This chapter provides you with important notices with regard to cleaning and maintaining the
device. Please observe the notices to prevent damages due to cleaning the device
incorrectly and to ensure trouble-free operation.
15.1 Safety information
Attention
Please observe the following safety notices, before you commence with cleaning the device:
► The device must be cleaned and food residues must be removed at regular intervals. If
the device is not maintained in a clean condition, this will have a detrimental effect on the
service life of the device and can also result in a dangerous condition in the device as
well as in the growth of fungus and bacteria.
► Switch the device off prior to cleaning it and unplug the plug from the wall power outlet.
► The hob can be hot after use. There is a danger of burning! Wait until the appliance has
cooled down.
► Clean the hob after use as soon as it has cooled down. Extended waiting unnecessarily
complicates cleaning and can make it impossible in extreme cases. Excessive
accumulations of dirt can even damage the device under certain circumstances.
► If dampness penetrates into the device, this can damage the electronic components.
Please ensure that no liquid can enter the interior of the device through the ventilation
slots.
► Do not immerse the appliance, its cables and the plug in water or other liquids, and do
not put it in the dishwasher.
► Do not use any aggressive or abrasive cleaning agents or solvents.
► Do not scrape off stubborn dirt with hard items.
15.2 Cleaning

Ceramic hob, Housing and Operating Panel
• Clean the hob, the housing of the device and the operating panel with a soft, slightly
damp cloth or a mild detergent. If there are accumulations of dirt (at ceramic hob), apply
white vinegar to the polluted zone.
Attention
► In order not to damage the plastic components, do not use any solvent-based cleaning
detergents such as, for example, petrol.
► Do not use any flammable, acidy or alkaline materials or substances near the device, as
this may reduce the service life of the device and lead to deflagration when the device is
turned on.