CASO Germany PRO Slide 2100 - Manual (Page 43)

caso ProSlide 2100 43
14.4.5 Special temp-functions
Fry Function
This function is used to fry steaks and other meat.
Press the button Special function (5) and select the “Fry” function.
The display lights up, with the preset stage 160.
You can change the stage with the + / - Keys (2) or the
Slider (6).
Keep Warm Function:
You can use this function to keep food warm.
Press the button Special function (5) and select the “Keep warm” function.
14.4.6 Timer
After selecting the power level, select the timer button (3).
With the + / - keys (2), you can now select the operating time in 1-minute intervals (up to
max. 3 hours).
Once the time is up, an acoustic signal sounds and the device automatically goes into shut
down mode.
The preset time of the timer in each power level is 2 minutes.
Please note
► During timer operation, you can change the duration at any time with the + / - keys (2).
With the memory function of the device, the power stage remain unchanged here.
► During the cooking process the power level and timer can be readjusted as you wish.
14.4.7 Booster
To reach the desired temperature very fast, press directly Booster (4), after selecting the
power level. Within the next 30 seconds additional booster power is reached. Afterwards
the hob switches back to the pre-selected power level.
For de-activation of booster press again Booster (4) and the hob switches back to the pre-
selected power level.
14.4.8 Lock function (children lock key)
Activation of Lock function:
Press the buttons + and - (2) until “Lock” LED lights up. All keys will be blocked except
Master On/Standby (1), to avoid mal-operation. After locking, induction hotplates continue
to heat in the preset power stage. Also the timer continues counting.
De-activation of Lock function:
Press the buttons + and - (2) about 3 sec. until all keys are free to use again.