Salter Brecknell CS Series Crane - Manual (Page 10)

10
6.0 Display messages
There are several messages which may appear on the scale display. Below is
a list of those messages and what they mean.
Err10 You are trying to accumulate a weight smaller than the minimum
required.
Err11 You are trying to accumulate more than 30 weighments. 30 is the
limit.
Err12 Accumulated weight exceeds 99999. 99999 is the upper
accumulated weight limit.
CLr This is a prompt to see if you really want to clear the accumulated
weight.
noCLr This means you aborted the clearing process.
8.8.8.8.8.8. This confirms deletion of the accumulated weight.
noACC Displayed when you check accumulated weight and none has
been accumulated yet.
SHIFt Displayed after pressing the RC MR key.
U X.XX The current battery voltage.
-OL- Displayed when the scale is overloaded.
-LB- Low battery warning.
OFF Displayed as unit powers off.