Salter Brecknell B120 - Manual (Page 10)

8
4. Place the items to be counted on the scale…
The total weight, piece weight and count of the items will be shown in
the three display windows respectively.
5. Remove the items from the scale and repeat steps 4 and 5 to count
items of the same piece weight.
6. Repeat steps 2-5 to count items of a different piece weight.
Counting can also be done while using a tare. After you have set the piece
weight (step 3 ), place the item to be tared on the scale, press the Tare key and
continue with counting as described in step 4 .
Counting Using Upper and Lower Count Limits
You can do counting with an alert system to tell you when you have an
acceptable number of items on the scale. This can be handy when you want to
repeatedly fill bags to the same count. Use the instructions below to set an
upper count limit and a lower count limit. When your counts fall between these
numbers (inclusive) a beeper sounds to let you know you’ve hit your target
number.
1. Turn the scale on and zero the display, if necessary, using the Zero key.
Be sure the scale is displaying weight in your preferred unit of measure.
Change it using the Units key, if necessary.
2. Use sampling or entering a known piece weight to set the piece weight.
3. Press the Upper key…
uP. PCS
is shown in the PIECE WEIGHT window and a number
appears in the COUNT window.
4. Press the Clear key to clear the number from the COUNT window. Key
in the upper acceptable count of items. (You can set the upper and
lower limit to the same number to have the alert beeper sound just
on that count.) Press the Enter key to accept this number…
5. Press the Lower key…
Lo. PCS
is shown in the PIECE WEIGHT window and a number
appears in the COUNT window.
6. Press the Clear key to clear the number from the COUNT window. Key
in the lower acceptable count of items. (You can set the upper and
lower limit to the same number to have the alert beeper sound just
on that count.) Press the Enter key to accept this number…
The scale returns to count mode.
7. Place items to be counted on the scale until you hear the alert beeper…
The count will be within the upper and lower limits you have set.