Salter Brecknell ESA Series - Manual (Page 11)

11
1. Remove the two screws holding the battery compartment lid on the
bottom of the scale.
2. Gently pry up the battery cover and remove.
3. Insert the correct number of batteries.
4. Replace cover and tighten screws.
5. Return balance to upright position and press the On/Off key to turn the
scale on and resume normal weighing or counting functions.
Error Codes and Troubleshooting
If the scale shows something unexpected, you may be able to resolve it
yourself. Many times, the error can be resolved by powering the scale off and
then back on again. The table on the next page shows some basic
troubleshooting tips to try before calling for service.