Event > di/do, Vent, Di/do – AVer SD1306 user manual User Manual
Page 67
63
Event > DI/DO
SD1306 supports 2 digital input/1 digital output. When input is triggered, it can trigger the relay and
send the video to some specific mail addresses, transmit the video to remote ftp server and save video
to local microSD/SDHC card.
CAUTION!!
Please connect to propriety relay box to reduce the risk of electric shock & damaged.
Input Setting:
Input 1 or 2 sensor: This is to set the relay status while sensor is not yet triggered.
Input 1 action: Send the triggered video clips or photos to the selected method.
Subject: This is the subject while sending files via e-mail.
Interval:
For example, if you select "10 sec" here, once the motion is detected and action is
triggered, it cannot be triggered again within 10 seconds.
Based on the schedule:
The motion detection is enabled only during the schedule time the.
That is, for example, 11:00~12:00 on Monday has not been colored in the schedule table,
then no action will be triggered even the camera detects motion during 11:00~12:00 on
Monday.