AVer SD1306 user manual - Manual (Page 40)

36

RTSP Authentication: Select the RTSP authentication mode – disable, basic, or digest.

RTSP Port: setup port for RTSP transmitting (default: 554)

RTP Start and End Port: in RTSP mode, you may use TCP and UDP for connecting. TCP
connection uses RTSP Port (554). UDP connection uses RTP Start and End Port.

ONVIF: User can enable ONVIF standard and select the ONVIF version or disable it.

Security: Yes is required account and password to connect with this IP camera through ONVIF
protocol. No is not required account and password to connect.

RTSP Keepalive: To keep connected until remote site disconnects it.