AVer SF2111H series quick guide - Manual (Page 20)

16
3.3.2 SF2111H-DVR
1. To recover the default IP address and password, please follow the following steps.
2. Remove power and Ethernet cable, press and hold the button for 10 sec. Please refer to the
picture below.
3. Connect power and Ethernet cable to the camera again. Power on the camera. Don’t release the
button during the system booting.
4. It will take around 30 seconds to boot the camera.
5. Release the button when camera finishes proceed.
6. Re-login the camera using the default IP ( http://192.168.1.200 ) or DHCP, and user name (admin),
password (admin).