AVer SF2111H series quick guide - Manual (Page 19)

15
3.3 Factory Default
3.3.1 SF2111H-DR
1. To recover the default IP address and password, please follow the following steps.
2. Remove power, and press and hold the button. Please refer to the picture below.
3. Power on the camera. Don’t release the button during the system booting.
4. It will take around 30 seconds to boot the camera.
5. Release the button when camera finishes proceed.
6. Re-login the camera using the default IP ( http://192.168.1.200 ) or DHCP, and user name (admin),
password (admin).
Reset button