beautypg.com

AVer SF2111H-DVR user manual User Manual

Page 69

background image

65

Factory Default

1. To recover the default IP address and password, please follow the following steps.

2. Remove power and Ethernet cable, press and hold the button for 10 sec. Please refer to the

picture below.

3. Connect power and Ethernet cable to the camera again. Power on the camera. Don’t release the

button during the system booting.

4. It will take around 30 seconds to boot the camera.

5. Release the button when camera finishes proceed.

6. Re-login the camera using the default IP (http://192.168.1.200)

or DHCP, and user name (admin),

password (admin).

See also other documents in the category AVer Camcorders: