beautypg.com

3 factory default – AVer SF2012H series quick guide User Manual

Page 11

background image

7

2.3

Factory Default

1. Removing an Ethernet cable.

2. Plugging “a pink default cable” into “GND”.

3. Plug power cable.

4. When camera starts again, please remove the pink default cable and plug Ethernet cable for new

setting.

5. Release the button when camera finishes proceed.

6. Re-login the camera using the default IP (

http://192.168.1.200

), and user name (admin),

password (admin).

See also other documents in the category AVer Camcorders: