AVer EH6216H+ quick guide - Manual (Page 8)

4
5. Turn the plate and hard disk over carefully and
screw the hard disk on the plate. If hard disk
cannot match to the screw hole, then, you may
adjust the hard disk position to match the
screw hole.
6. Plug the SATA cable into SATA connector on
the PC board.
[Note]
1. SATA 5 is for DVD player.
2. SATA 4 is for e-SATA interface
3. 1
st
HDD is suggested to install on SATA 6.
4. The number of SATA connector is displayed
nearby SATA connector.
7. Plug the power cable and SATA cable into
hard disk. And then, screw the plate inside the
DVR unit.
8. Plug the SATA cable into the left side hard
disk.
User can leave un-plug the SATA cable on
the left side HDD for screwing plate inside
the DVR more easily later.